The following change will be available on next release Kettle(equipement) thermal mass for more precise calculation A setting to specify if temperature control(PID) is applied during doughing...

This release is to solve one issue. Under certain circumstances, the log chart will not shown. TL;DR The cause is that the reading from SPIFFS returns zero. I suspect it has something to do with r...

New features Recipes management Import BeerXML View and brew recipes Bugs fixed: No logging if the automatic process is interrupted and power-off or entering manu...

The major enhancement is on the format of “remote logging”. Add PUT method Use printf-like format Data Type.(Content-type) The printf-like format and specification of content type provide...

Boiling temperature is one important setting for boiling stage. First, counting of boil time starts when boiling temperature is reached. Second, the PWM control is available when temperature is hig...

I have been develop BrewManiacEx myself, but I am not alone. Although most of the features are design to fit my own requirements, some of them are from discussions with readers of this blog. I appr...

This release is to enable BrewManiacEx to work under AP mode, so that you can use it without an Access Point. It also fixes a bug which will result in RESET of system if the connected network disap...

Hardware configuration There are three files you might need to check if you are not using default settings. config.h Most software configuration is defined here. The most important one is th...

Connections: 1~3, ACT1, ACT2,ACT3 connect to 5V driven SSR or Relay. for pump, heater, and sparge Heater control. If “Relay Modules” are used, use port “9. ACT Signal“. Buzzer ...

BrewPiLess now supports data log LOCALLY. Given the fact that there is 3M space of 4M flash on NodeMcu or WEMOS D1 min, it seems to be a waste not to use the space, not to mention that WEMOS D1 pro...